Modify an iSCSI endpoint

Unisphere provides monitoring and management for Internet Small Computer Systems Interface (iSCSI) directors, iSCSI ports, iSCSI endpoints, IP interfaces, and IP routes.

Steps

  1. Select a storage system.
  2. Select System > iSCSI to open the iSCSI dashboard.
  3. Click iSCSI Endpoints to open the Attached iSCSI Endpoints list view.
  4. Select a director and click Modify to open the Modify iSCSI Endpoint dialog.
  5. Optional: Type a value for the Endpoint Name.
    If you do not enter a value, the system generates a unique iqn for the endpoint name. If you enter a value, it must follow the following rules:
    • Start with iqn. or eui. strings.
    • Composed of alphanumeric characters, colons, dashes, and periods.
    • Less than, or equal to, 255 characters.
    • Unique on the storage system.
  6. Type a value for the Network ID.
    Valid values range from 1 through 16383.
  7. Type a value for the TCP Port.
    The default value is 3260. Valid values range from 0 through 65535.
  8. Click OK.